# text: "Sorry, but this application can\'t find enough available RAM to load in the current machine configuration."
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=57 x2=80 y2=77
# text: "Finder"
DITL_257_Unknown Mach.txt
# 2 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=98 y1=14 x2=332 y2=77
# text: "The application cannot determine the machine type or the operating system version and must exit."
# item 1: BUTTON (0x04) enabled
# bounds: x1=26 y1=56 x2=86 y2=76
# text: "Finder"
DITL_258_Error Message.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=112 y1=108 x2=170 y2=128
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=68 y1=10 x2=277 y2=98
# text: "^0"
DITL_601_Configure.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=152 y1=78 x2=210 y2=98
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=26 y1=78 x2=84 y2=98
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=24 y1=40 x2=104 y2=60
# text: "Select File"
# item 3: BUTTON (0x04) enabled
# bounds: x1=132 y1=40 x2=212 y2=60
# text: "Reset All"
# item 4: TEXT (0x88) disabled
# bounds: x1=64 y1=6 x2=158 y2=22
# text: "Configuration"
DITL_602_OK to Delete?.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=170 y1=110 x2=228 y2=130
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=92 y1=110 x2=150 y2=130
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=231 y2=81
# text: "There is already a file named “^0” in the folder “^1”. Do you want to delete the file?"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=84 x2=143 y2=102
# text: "Auto overwrite"
DITL_603_Progress.txt
# 1 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=20 y1=8 x2=206 y2=53
# text: "Now moving “^0”."
DITL_604_Help.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=294 y1=254 x2=352 y2=274
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=198 y1=254 x2=256 y2=274
# text: "Reset"
# item 2: PICTURE (0xC0) disabled
# bounds: x1=138 y1=0 x2=226 y2=31
# PICT resource ID: 600
# item 3: TEXT (0x88) disabled
# bounds: x1=26 y1=38 x2=351 y2=87
# text: "Put Away is a System 7 “drag & drop” utility based on a suggestion by Jim Bumgardner of Warner New Media. When you drop files onto it, it asks where to put each file and remembers the locations for all file types — it doesn’t ask twice."
# item 4: TEXT (0x88) disabled
# bounds: x1=26 y1=94 x2=351 y2=144
# text: "Files on the same volume are moved. Files from different volumes are copied. Each file is identified by creator and type, so TEXT/MACA files can go to different locations than TEXT/ttxt. You can drag many files into it at once. "
# item 5: TEXT (0x88) disabled
# bounds: x1=26 y1=184 x2=351 y2=211
# text: "To make a new list of locations, click the “Reset” button. To delete some locations, use ResEdit to change the Loc# resources."
# item 6: TEXT (0x88) disabled
# bounds: x1=26 y1=218 x2=351 y2=244
# text: "You will see this dialog whenever you run Put Away without dropping files into it."
# item 7: TEXT (0x88) disabled
# bounds: x1=26 y1=150 x2=351 y2=177
# text: "If you hold down the Option key when dropping files into Put Away, it will copy all files, even if they’re on the same volume."
DITL_605_Really Reset?.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=154 y1=66 x2=212 y2=86
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=72 y1=66 x2=130 y2=86
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=6 x2=210 y2=55
# text: "Do you really want to reset Put Away? This will erase its memory of folder locations."